- Turn on a device.
- On the remote control, press a device key once (e.g., AUX, VCR, or CABLE). Press and hold SETUP until the selected mode key flashes twice, then release SETUP.
- ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again.
- Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code.
- Repeat steps 1-4 for each device you want the remote control to control. For future reference, write down each working device code.
Tags